Day 7 - 21st April

I had ordered a roll of 10m matte black vinyl earlier in the week for covering the base and inside edges of the cabinet - basically any surface not requiring artwork. The goal this weekend was to vinyl wrap the panels of the cabinet. To do this the first step was to dismantle the cabinet parts and Vinyl wrap the inside faces. Once this was done the cabinet could be reassembled, screw holes filled with filler and smoothed and then the outer surfaces were vinyl wrapped also.

Cabinet after reassembly and wood filling ready for vinyl

The first side is vinyl wrapped - this went on very smoothly

The second side is wrapped, again relatively easily

The front is vinyl wrapped, an absolute nightmare and by far the hardest part of the project so far. This was made hard due to the curve/angle and the fact it was a single piece of vinyl.

Vinyl is applied to all base surfaces and the Street Fighter logo graphic is applied to the control box